Invicta Worldwide: United Kingdom | North America | Middle East

Home
Durasteel

What is Durasteel?

Durasteel is a composite panel fire protection board providing 4 hour fire protection and blast protection.

Board Composition

Durasteel board composition and characteristics overview.

Certifications and Approvals

Including FM, UL, Certifire, DNV and BSI.

Videos

Performance demonstration test videos.

Downloads

Brochures and technical data sheets.
System Types

Fire Barriers

4 hour low radiation fire walls and barriers providing stability, integrity and insulation.

Blast Walls

Blast walls designed specifically to protect personnel and facilities from blasts.

Transformer Barriers

Leading blast protection against transformer and generator explosions.

Building Services

Fire rated enclosures for cable ducts and general building services.

Ceilings

Fire rated ceilings which resist fire from both above and below.

Fireproof Vaults

4 hour fireproof media vaults for ultimate document and media fire protection.

Valve Enclosures

Power and petrochemical facility valve isolation enclosures.

Fire Doors & Shutters

2 and 4 hour fire doors for commercial and industrial use.
Applications

Airports

Passive fire protection systems for airports and hangers.

Power Stations

Fire and blast protection systems for power stations.

Rail and Metro

Fire protection for rail and metro stations and tunnels.

Off-Shore Platforms

Fire and blast protection systems for off-shore platforms and oil rigs.

Petrochemical

Fire and blast protection systems for petrochemical facilities.

Warehouses

Passive fire protection systems for warehouses and archive storage facilities.
Case Studies
Technical Data
Technical Data Overview
Fire Walls and Barriers
- Fire Barrier Specifications
- Composite Fire Barrier Specifications
Ceilings
- Suspended Ceiling Specifications
- Composite Membrane Plenum Ceiling Specifications
Fire Doors and Access Hatches
- Fire Door Specifications
- Fire Shutter Specifications
Resources

Passive Fire Protection

Information on passive fire protection.

Blast Protection

Information on blast protection.

Fire Stopping

Information on fire stopping.

Fire Protection Board

Information on fire protection board.
Contact

Call Us

In the UK    0800 085 2895
In Europe    +44 (0)1843 220 256
In North America    +1 305 328 9444
In the Middle East    +971 4 293 5906

Or Request A Callback

Send Us An Email

We aim to get back to you within 60 minutes during normal office hours.

Request A Brochure

Receive one of our brochures, either electronically or a hard copy.

Office Locations

Find your nearest Invicta office in the UK, Middle East and North America.

Home
- › durasteel system types
  - › durasteel substation ceilings

Durasteel

Durasteel is an ideal solution as a fireproof ceiling, providing up to 4 hours of fire protection in addition to being strong enough to be walked upon where required.» read more

Discuss Your Project

To discuss your
Fire Protection Project
or arrange a
Site Survey
Call Benn Larkin on
+44 (0)7980 817405

Contact Us

UK & Europe

0800 085 2895Freephone
+44 (0)1843 220 256

North America

+1 305 328 9444

Middle East & Africa

+971 4 293 5906

Request A Callback

Request A Brochure

View Case Studies

Technical Data

Office Locations

Our Divisions

Substation Ceiling Fire Protection

Print This Page Email This Page Bookmark This Page

Invicta Durasteel is used in the protection of chamber soffits housing electrical equipment.

Invicta Durasteel ceilings are constructed with a steel support grid comprised of 150mm x 60mm x 3mm cold rolled channel sections. A perimeter CRC section is fastened to the structure by M10 rawlbolts at 500mm centres. CRC sections are bolted together using M10 x 25mm long bolts and nuts at 500mm centres to form a light 'I' section which is installed to span at 1200mm centres to the perimeter channel by M10 x 25mm bolts and nuts using steel angle cleats with noggins between at 2500mm centres.