For your information
You are being redirected to one of our divisional subsites which contains more detailed information on the required division. To navigate back to the main Invicta Group site, please click the link found in the footer at the bottom of the page.
30 Minute Insulated Durasteel Fire Barrier (E240, EI30)
Quick Quote
Contact Fraser Shearer Sarun Vysakham Ben Tan Anand Raghavan Anand Raghavan Our USA Office
To get a quotation or arrange a free site survey - Call Fraser Shearer Sarun Vysakham Ben Tan Anand Raghavan Anand Raghavan Our USA Office on
-
UK
-
UAE
-
Malaysia
-
India
-
Qatar
-
USA
Current location:
Quick Quote
Contact Fraser Shearer Sarun Vysakham Ben Tan Anand Raghavan Anand Raghavan Our USA Office
-
UK
-
UAE
-
Malaysia
-
India
-
Qatar
-
USA
Current location:
Key Details
- Fire resistance: 240 minutes integrity, 30 minutes insulation (E240 EI30)
- Test standard: BS EN 1364-1: 1999
- Fire attack: Both sides
- Framework: 80mm x 60mm x 3mm (for heights up to 6m)
- Overall depth: 118mm
- Weight (nominal): 51kg/m2
- Estimated sound reduction: 42dB
- Maximum height: 3m
System Build-Up
- 9.5mm Durasteel sheet
- 80 x 60 x 3mm CRC at 1200mm centres
- M5.5 x 38mm self-drill, self-tap tek screws at max 200mm centres
Construction
Perimeter channels fastened to surrounding construction with M10 or M12 all-steel expanding anchors (or equivalent for alternative types of supporting construction) at 500mm maximum centres.
The vertical channels are set at a maximum 1200mm centres. Horizontal and vertical channel members either welded together or joined with steel angle cleats, minimum 60mm x 60mm x 3mm thick x 60mm long, fastened to each channel member with two M10 steel bolts and nuts.
9.5mm Durasteel sheets fixed on both sides of the channel with M5.5 steel self drill and tap Tek screws at 250mm nominal centres.
Fixings a minimum of 12mm from edge of sheet and a maximum of 50mm from corners. Length of fixing to be sufficient to ensure appropriate penetration of screw thread in accordance with screw manufacturer’s recommendations.
Vertical board joints coincide with studs, horizontal board joints are backed by steel channel the same size as the vertical studs.
Accreditations & Affiliations
SpecUp - System Specification Wizard
Answer the 5 short questions below to receive your recommended Durasteel system specifications. Hover over the ? icons for a brief explanation.
Question 1/5
Type of system required?
Question 2/5
Fire rating required?
Question 3/5
Fire integrity-only or integrity and insulation?
Question 4/5
Fire attack risk from one side or both sides of the system?
Question 5/5
Blast rating required in addition to fire rating?
Creating your results page
Thanks for completing the SpecUp, you’ll be redirected to your results shortly.
Click here if you aren't redirected after a few seconds
Share/Like this page