Interactive EI240 Durasteel Barrier

1

...

Durasteel Panel

Single layer of 9.5mm thick Durasteel 4 hour composite panel fixed on both sides of the channel with M5.5 steel self drill and tap Tek screws at 250mm nominal centres

2

...

Steel Framework

Typically 80mm x 60mm x 3mm or 150mm x 60mm x 3mm Cold Rolled Channel framework, with vertical channels set at 1200mm maximum centres

3

...

Angle Cleat

Typically 60mm x 60mm x 3mm or 120mm x 60mm x 3mm x 60mm long, fastened to each channel member with two M10 x 25mm steel bolts, nuts and washers

4

...

M5.5 Tek Screw Fixings

Typically 38mm long 5.5mm self drill and tap Tek screws

5

...

Mineral Wool Insulation

Varies from 80mm to 150mm thick and 60kg/m³ to 140kg³ density depending on thermal insulation performance required

Durasteel EI240 Fire Barrier

Fire Resistance: 240 minutes (integrity and insulation)

Durasteel insulated fire barriers are used in constructions where high insulation as well as stability is required during a fire, and are designed to prevent the passage of heat from a fully developed fire on the exposed face.

Our insulated fire barriers can be designed to provide anywhere from 60 minutes (1 hour) thermal insulation up to 240 minutes (4 hours), with a maximum permitted temperature rise allowable on the surface of the unexposed face of 140°C as a mean temperature over the entire surface, or a maximum temperature rise of 180°C at any single point on the surface.

Hover over highlighted areas for more details.