DISCUSS YOUR PROJECT

Call Benn Larkin on

+44 (0)7980 817 405

Typical Connection Details

Please note that the following Durasteel system connection details are examples only. Connection details for each system will differ according to the specific requirements of the system.

Wall Interface

Wall Interface
  1. 150mm x 60mm x 3mm CRC Frame
  2. M10 Expanding Bolts at 500mm Maximum Centres
  3. 15mm Promatect 250
  4. 9.5mm Durasteel Sheet
  5. Tek Screws at 200mm Maximum Centres
  6. Silicone to all Abutments

Sheet Join Interface

Building Steel Penetration Interface
  1. 150mm x 60mm x 3mm CRC Frame Back To Back
  2. M10 x 25mm Bolts c/w Nut and Washer
  3. 15mm Promatect 250
  4. 9.5mm Durasteel Sheet
  5. Tek Screws at 200mm Maximum Centres

Pipe Penetration Interface

Pipe Penetration Interface
  1. 150mm x 60mm x 3mm CRC Frame
  2. 9.5mm Durasteel Sheet
  3. 15mm Promatect 250
  4. Tek Screws at 200mm Maximum Centres
  5. Existing Pipe
  6. Rockwool Insulation
  7. Promaseal Fire Compound
  8. 100mm x 50mm x 3mm Rolled Steel Angle

Cleating - Corner Interface Elevation View

Cleating - Corner Interface Elevation View
  1. 150mm x 60mm x 3mm CRC Frame
  2. 9.5mm Durasteel Sheet
  3. M10 x 25mm Hex HD Bolts or M10 x 20mm CSK HD Bolts c/w Nut and Washer
  4. 120mm x 60mm x 3mm Angle Cleats
  5. M10 x 20mm CSK HD Bolts c/w Nut and Washer

Cleating - Perimeter Interface Elevation View

Cleating - Perimeter Interface Elevation View
  1. 150mm x 60mm x 3mm CRC Frame
  2. 9.5mm Durasteel Sheet
  3. M10 x 25mm Hex HD Bolts or M10 x 20mm CSK HD Bolts c/w Nut and Washer
  4. 2 No. 120mm x 60mm x 3mm Angle Cleats
  5. M10 x 20mm CSK HD Bolts c/w Nut and Washer

Cleating - Section View

Cleating - Section View
  1. 9.5mm Durasteel Sheet
  2. M10 x 25mm Hex HD Bolts or M10 x 20mm CSK HD Bolts c/w Nut and Washer
  3. 150mm x 60mm x 3mm CRC Frame
  4. 2 No. 120mm x 60mm x 3mm Angle Cleats
  5. M10 x 20mm CSK HD Bolts c/w Nut and Washer

Cleating - Internal Interface Elevation View

Cleating - Internal Interface Elevation View
  1. 150mm x 60mm x 3mm CRC Frame
  2. 9.5mm Durasteel Sheet
  3. 120mm x 60mm x 3mm Angle Cleat
  4. M10 x 20mm CSK HD Bolts c/w Nut and Washer
  5. M10 x 20mm CSK HD Bolts c/w Nut and Washer

Cleating - Internal Interface Section View

Cleating - Internal Interface Section View
  1. M10 x 20mm CSK HD Bolts c/w Nut and Washer
  2. 150mm x 60mm x 3mm CRC Frame
  3. 120mm x 60mm x 3mm Angle Cleat
  4. M10 x 20mm CSK HD Bolts c/w Nut and Washer
  5. 15mm Promatect 250
  6. 9.5mm Durasteel Sheet

Suspended Movement Head Detail

Suspended Movement Head Detail
  1. Profile Cut and Seal to Purlins
  2. Curved 150mm x 60mm x 3mm CRC Head Channel
  3. 9.5mm Durasteel Sheet
  4. Tek Screws at 200mm Maximum Centres
  5. 15mm Promatect 250
  6. 80mm x 60mm x 3mm CRC Frame Back To Back
  7. Slotted Cleat for 80mm x 60mm x 3mm CRC Frame

Standard Movement Head Detail

Standard Movement Head Detail
  1. Profile Cut and Seal to Purlins
  2. Curved 200mm x 60mm x 3mm CRC Head Channel
  3. 9.5mm Durasteel Sheet
  4. Tek Screws at 200mm Maximum Centres
  5. 15mm Promatect 250
  6. 150mm x 60mm x 3mm CRC Frame Back To Back
  7. Slotted Cleat for 150mm x 60mm x 3mm CRC Frame

Wall Fixing

Wall Fixing
  1. Dwarf Wall
  2. Existing Plasterboard Wall
  3. Mastic
  4. Mastic
  5. 150mm x 60mm x 3mm CRC Frame Back To Back
  6. M10 x 25mm Bolts c/w Nut and Washer
  7. 15mm Promatect 250
  8. 9.5mm Durasteel Sheet
  9. Tek Screws at 200mm Maximum Centres

Roller Shutter Steelwork Fixing

Roller Shutter Steelwork Fixing
  1. 50mm x 50mm x 3mm Angle
  2. 150mm x 60mm x 3mm CRC Frame Back To Back
  3. M10 x 25mm Bolts c/w Nut and Washer
  4. 15mm Promatect 250
  5. 9.5mm Durasteel Sheet
  6. Tek Screws at 200mm Maximum Centres
  7. Welded Plate Between Flanges
  8. Mastic